ARM Based Intelligent Soft Starter for Consumer Applications
DOI:
https://doi.org/10.51983/ajes-2015.4.1.1935Keywords:
Gsm, induction motor, silicon-controlled rectifier (SCR), Thyristor, Three phase controlAbstract
The main objective of this project is to design a soft starter for consumer application, Gsm technology is used to get the voltage readings through mobile, The power theft also identified here by means of voltage measurement is presented in this paper. Here thyristor is used as soft switch. Three soft switches are used in three phases which is Star, Delta and Main phase. With the help of Gsm technology the motor is controlled through the mobile. The performance resulted from the past fault-tolerant soft starter control has demonstrated reduced motor starting transient torque pulsations as well as reduced motor inrush current magnitude. The present are soft starter for consumer application presented here to demonstrate the soundness and effectiveness of the soft starter for consumer approach and motor can be controlled from remote location.
References
A.K. Jain, S.Mathapati, V. T. Ranganathan, and V. Narayanan, "Integrated starter generator for 42-V powernet using induction machine and direct torque control technique," IEEE Trans. Power Electron., vol. 21, no. 3, pp. 701–710, May 2006.
S. Kaboli, E. Vahdati-Khajeh, and M.R. olghadri, "Probabilistic voltage harmonic analysis of direct torque controlled induction motor drives," IEEE Trans. Power Electron., vol. 21, no. 4, pp. 1041–1052, Jul. 2006.
P. T. Cheng, C. C. Hou, and J.S. Li, "Design of an auxiliary converter for the diode rectifier and the analysis of the circulating current," IEEE Trans. Power Electron., vol. 23, no. 4, pp. 1658–1667, Jul. 2008.
M. A. Juds, K. Lee, M. G. Solveson, W. E. Berkopee, and J. A. Becker, "A coupled thermal and electrical time-domain soft starter system model," in Proc. IEEE IAS Annu. Meet., 2005, vol. 4, pp. 2607–2614.
D. Maillet, S. André, J. C. Batsale, A. Degiovanni, and C. Moyne, Thermal Quadrupoles: Solving the Heat Equation Through Integral Transforms. New York: Wiley, 2000.
J. C. Batsale, D. Maillet, and A. Degiovanni, "Extension de la notion de quadripole thermique `a l’aide de transformations int´egrales: calcul du transfert thermique au travers d’un d´efaut plan bidimensionnel," Int. J. Heat Mass Transfer, vol. 37, no. 1, pp. 111–127, 1994.
F. Wang, G. Chen, D. Boroyevich, S. Ragon, M. Arpilliere, and V. R. Stefanovic, "Analysis and design optimization of diode front-end rectifier passive components for voltage source inverters," IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2278–2289, Sep. 2008.
F. Profumo, A. Tenconi, S. Facelli, and B. Passerini, "Instantaneous junction temperature evaluation of high-power diodes (thyristors) during current transient," IEEE Trans. Power Electron., vol. 14, no. 2, pp. 292–299, Mar. 1999.
T. Bruckner and S. Bernet, "Estimation and measurement of junction temperatures in a three-level voltage source converter," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 3–12, Jan. 2007.
H. Stehfest, "Algorithm 368: Numerical inversion of Laplace transforms," Comm. ACM, vol. 13, no. 1, pp. 47–49, 1970.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
