Study of Cable Manufacturing Industry with Special Reference to Ravicab Cables Private Limited at Bidadi, Ramanagara District, Karnataka, India
DOI:
https://doi.org/10.51983/ajes-2018.7.2.2274Keywords:
Bidadi, Pot, PID, capstan machine, voltage sag, voltage swellAbstract
In this paper, cable manufacturing industry (Ravicab cables private limited) at Bidadi is considered for study. This cable industry is using three phase induction motor for its various operations. Mostly, mixing and pushing machine,
take up machine, capstan machine and cable drawing machines are in the need of three phase induction motor. In order to control these three phase induction motors, speed controller is essential. Therefore in this study, overall operation of the cable industry, speed controller used in this industry and its defects are discussed. Especially in this industry, Potentiometer (Pot) operated PID (Proportional Derivative Integral) controller based speed controller is used. While using this type of PID based speed controller in the disturbance environment, performance of the speed controller is severely affected.Peformance deterioration of this PID based speed controller is delineated when voltage fluctuation is considered as disturbance environment and also for sudden load changes.
References
M. Tsypkin, "The origin of the electromagnetic vibration of induction motors operating in modern industry: Practical experience—Analysis and diagnostics," IEEE Transactions on Industry Applications, vol. 53, pp. 1669-1676, 2017.
Herbert and Walt, "Totally enclosed fan cooled (TEFC) squirrel cage induction motor options," in Conference Record of Annual IEEE, pp. 17-25, November 2013.
A. Singh and B. Singh, "Energy Saving in Steel Industry by Replacing Standard Induction Motors With Energy Efficient Motors," International Journal of Engineering Research & Technology, vol. 3, pp. 1533-1536, 2014.
N. J. Braun, "Some aspects of the application of induction motors to aircraft," Transactions of the American Institute of Electrical Engineers, vol. 63, pp. 769-772, 1944.
G. V. Sadler and A. W. Davey, "Applications of linear induction motors in industry," IET Digital Library, vol. 118, pp. 765-776, 1971.
P. E. Radu Curiac and P. E. Sumit Singhal, "Rotor and stator stresses during starting of induction motors used in cement industry applications," in Cement Ind. Tech. Con. Rec. IEEE, pp. 1-11, June 2009.
R. Dabbousi, D. Savinovic, and Y. Anundsson, "A comparison between Induction & Synchronous motors for applications in the oil & gas industry," in Petroleum and Chemical Ind. Tech. Con. PCIC. IEEE, pp. 1-7, October 2008.
A. Goedtel and P. J. Amaral Serni, "Recurrent neural network for induction motor speed estimation in industry applications," in Electrotechnical Con, IEEE, pp. 1134-1137, July 2006.
G. Griva, C. Ilas, J. F. Eastham, F. Profumo, and P. Vranka, "High performance sensorless control of induction motor drives for industry applications," in Power Conversion Conference-Nagaoka, IEEE, pp. 535-539, August 1997.
S. Yang, D. Ding, X. Li, Z. Xie, X. Zhang, and L. Chang, "A novel online parameter estimation method for indirect field oriented induction motor drives," IEEE Trans on Energy Conversion, vol. 32, pp. 1562–1573, 2017.
S. Chandrakanth, S. Anil, T. R. Chelliah, and S. P. Srivastava, "Efficiency determination of induction motor and its sensitivity analysis towards parameter variation," International Journal of Artificial Intelligence and Soft Computing, vol. 4, pp. 144-163, 2014.
S. Suhel and R. Maurya, "Modelling, design and analysis of multi-phase induction motor," International Journal of Power and Energy Conversion, vol. 8, pp. 186-203, 2017.
S. Gairola and B. Singh, "Power quality improvement in vector controlled induction motor drive employing multipulse AC-DC converters," International Journal of Industrial Electronics and Drives, vol. 1, pp. 52-63, 2009.
K. Nafeesa and S. George, "Starting performance optimisation of two-leg AC voltage controller-fed three-phase induction motor drive," International Journal of Power Electronics, vol. 5, pp. 236-247, 2013.
J. Haataja and J. Pyrhonen, "Improving three-phase induction motor efficiency in Europe," Power Engineering Journal, vol. 12, pp. 81-86, 1998.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
